Read more about the STINGER 723
Pro Guide CLICK HERE
The Stinger 723 has been produced for more than 14 years and there are many different configurations for this hull. This hull has been built in 2C, 2D, 2E Survey for various end users. This vessel is very suitable for serious amateur Fisherman. Because of the waterline length of this boat it handles rough water particularly well as well as being at home in shallow water situations.
ABOVE....Stinger 723 view of aft lockers which also double as comfortable seats. The locker doors are strong enough for a big bloke to stand on and do some casting.
Note the stainless rod holders facing outwards each side for trolling and behind that the small locker each side, the port side is live well with all plumbing, and the starboard side opens to give access to the twin battery setup, deck wash down pump and hose.
BELOW....Note the forward half height locker immediatly aft of the anchor well, the low profile navigation lights, stainless cleats.
ABOVE....Stinger 723 . See the spring loaded "D" rings set into the forward floor area as tie down points for a carry on ice box ot dive bottle rack. Also note the rubber straps on the side stiffeners - useful to hold boat hook or paddle.
Stinger 723 at cruise. 4500 revs and 24 knots speed.
